Kel-Tec RFB

RFB

The RFB Carbine model with EOTech 512 Holographic weapon sight attached.
Type Semi-automatic Battle rifle
Place of origin  United States
Production history
Designer George Kellgren[1]
Designed 2003[1]
Manufacturer Kel-Tec
Produced 2008[1] - Present
Variants Carbine, Sporter, Target
Specifications
Weight 8.1 lb (3.7 kg) w. 18 in (460 mm) barrel (Carbine),
8.7 lb (3.9 kg) w. 24 in (610 mm) barrel (Sporter),
11.3 lb (5.1 kg) w. 32 in (810 mm) barrel (Target)
Length 26 in (660 mm) (Carbine)
32 in (810 mm) (Sporter)
40 in (1,000 mm) (Target)
Barrel length 18 in (460 mm) (Carbine)
24 in (610 mm) (Sporter)
32 in (810 mm) (Target)

Cartridge 7.62×51mm NATO
Action Gas-operating, tilting breechblock
Rate of fire Semi-automatic
Muzzle velocity 2,500 ft/s (760 m/s)
Effective range 1,000 m (1,100 yd)
Feed system 10 or 20-round metric FAL detachable box magazines[2][3][4]
Sights None

The RFB (Rifle, Forward-ejection, Bullpup)[4] is a gas-operated semi-automatic rifle, manufactured by Kel-Tec Industries of Florida. At the 2008 SHOT Show held from February 2 to 5 in Las Vegas, Nevada it was declared by Kel-Tec representatives that the RFB rifle would be made available to the public by the 4th quarter of 2008. Later, the Kel-Tec website stated that the 18 in (460 mm) barrel carbine variant would not be shipping until February 2009 due to a change in the production process meant to get more rifles manufactured before a new Assault Weapons Ban can be put in place.[5] The rifle first shipped to distributors in the first week of March 2009.[6]

It was first seen at the 2007 SHOT Show.[1]

Contents

Design details

The RFB is a semi-automatic firearm chambered for 7.62×51mm NATO, and is also capable of using .308 Winchester ammunition. The RFB uses metric FAL magazines,[7] which insert straight into the magazine well and does not need to rock into place. It utilizes a short-stroke gas piston operating system. The rifle uses a patented forward-ejection system via a tube placed over the barrel that ejects the spent case forwards, over the handguard of the rifle. Extraction is accomplished by two extractors, each with 2 axes of rotation. The extractors may move side-to-side to engage the rim of the case, and pivot upwards to extract the spent case after firing. Empty cases remain in the ejection chute[3] until either the weapon is tilted downwards, the charging handle is operated, or they are pushed out by following cases. Cases drop gently from this chute to the left of the barrel.[1] To avoid sloppy trigger pull typical of firearms modified into bullpups, the RFB utilizes a floating linkage bar between the sear and the hammer, allowing the sear to remain above the trigger.[8] The weapon is fully ambidextrous,[9] much in the style of the Belgian F2000 rifle. The RFB accepts FN FAL-style magazines, and is delivered without iron sights.[10] A mil-spec Picatinny rail is provided for mounting a wide range of optics and tactical accessories.[8]

The barrel of the RFB is not fully free floated, it instead serves as the rigid "spine" of the weapon, to which all other components are attached (either directly or through other components).

Meanwhile, Kel-Tec is preparing smaller versions of the same design, adapted to 'intermediate' calibers such as 7.62×39mm, 5.56×45mm NATO (.223), 6.5 Grendel and 6.8mm Remington SPC.[1] The 5.56×45mm NATO version has been tentatively named the CFB (Carbine, Forward-ejection, Bullpup), and will feed from standard AR-15 magazines.

Variants

Kel-Tec has planned to build at least 3 versions with differing barrel lengths, weight, overall length, and performance. The Carbine with a 18 in (460 mm) barrel, a Sporter variant with 24 in (610 mm) length barrel and Target version with either a heavy profile 32 in (810 mm) barrel or 26 in (660 mm) stainless steel barrel.[11] The Target version also features a 5-way adjustable trigger, for a trigger pull from 2 to 6 lbf (8.9 to 27 N). As of the end of 2010, the Carbine version has been the only one publicly released for sale.

References

External links

Videos